DESCRIPTION

VIVEDUR WATER-BASED PRIMER is a transparent acrylic water-based primer for walls, with strong adhesion and great penetration. It is odorless, friendly to the environment and the user and for this reason it is recommended for the priming of interior spaces and especially for enclosed spaces that are inhabited. VIVEDUR WATER PRIMER is suitable for the preparation of new surfaces to be painted with plastic paints, such as plaster, concrete, bricks, plastered walls. In addition, it strengthens and insulates porous surfaces painted with lime, glue or low-quality old paints and ensures better adhesion and spread for the final paint.

SURFACE PREPARATION

The surfaces must be clean, dry and free from defective or poorly cohesive materials, dust, oils and salts.

Processing such as dry sanding, using a flame to cut or weld painted surfaces will create dust and/or hazardous fumes. Wet scrubbing should be used where possible. Work in a well-ventilated area. Use suitable means for respiratory protection.

For plastering and troweling the surfaces: Use NEOPAL STUCCO.

APPLICATION

Apply one coat of VIVEDUR WATER PRIMER diluted 100% with clean water. For highly absorbent surfaces, dilute up to 50% with clean water.

Shake well before use.

Ensure good ventilation during application and drying.

Application and drying at a temperature of 10°C to 35°C.

PRODUCT DETAILS

• TYPE : Transparent acrylic water primer.
• SPECIFIC GRAVITY : 1.02 ± 0.02 g/cm3 (ISO 2811)
• VISCOSITY : 54 ± 6 sec (FORD CUP 2)6 sec (FORD CUP 2)
• APPLICATION METHOD: Roller, brush or airless gun.
• DILUTION: 50-100% pure water depending on the absorbency of the surface.
• YIELD: Approximately 15-20m² per liter per coat (dilution with water 50% to 100% respectively), depending on the absorbency of the surface.
• DRYING: To the touch in 1 hour and repaintable after 4 hours. These times vary according to weather conditions (humidity, temperature).
• STORAGE : To be stored at a temperature from 5°C to 40°C

CLEANING TOOLS

• Remove as much material as possible from tools before cleaning them
• Clean tools immediately after use with water and detergent solution.