DESCRIPTION

POLYDOX Hydro impregnation mat is an odorless water-based stone protective product, with a special formulation that provides excellent penetration, waterproofing and resistance to oils, greases and other contaminants for external and internal surfaces. It is applied to absorbent surfaces, such as stone slabs, marble, decorative bricks, fire bricks, sandstone, natural and artificial stones, tiles and other ceramic materials, cement-like stones, fiber-reinforced cement, etc. It does not create a film, does not yellow and does not alter the surface being protected, while it is easy to clean and prevents the growth of fungi. It protects stone-built houses and structures from the effects of the weather and atmospheric pollution. Product of applied nanotechnology.

SURFACE PREPARATION

Thoroughly clean the surface of grease, dust, oil, grease, old paint, loose pieces, rust, etc. The surfaces to be painted must be absolutely clean and dry. The best possible penetration is achieved when the surfaces contain the lowest possible moisture.

APPLICATION

Mix well. Apply as much POLYDOX hydro as you can so that the surface absorbs well. If a second coat is needed, observe the required repainting times.

specifications

• APPEARANCE : Matt. Does not form a film
• PERFORMANCE: 4-8 m²/lt per layer, depending on the absorbency of the surface.
• DILUTION : Ready to use.
• DRYING : Surface in 30 minutes.
• REPAINTING : Repainting ½ -1 hour after the previous layer has completely dried. The above times are extended under cold and wet conditions. Caution! No repainting the next day!
• APPLICATION: Brush, Roller, Spraygun