There are 27 products.
Cementitious putty in powder, reinforced with suitably modified acrylic resins. Suitable for plastering - puttying surfaces made of plaster, concrete or plasterboard of indoor or outdoor spaces. Blends easily without clumping, works softly, fills extremely well and dries quickly. It rubs easily, does not crack, does not shrink and gives a smooth surface. Eliminates all oily putty and "contact" with solvents.
30 Gel is a mineral gel adhesive material, environmentally friendly with a very low content of chemical additives, for the welding of high performance, with zero vertical slip and with a long open time of application of granite tiles. Ceramic tiles and natural stones.
- H40 Gel is the first and only "all in one" product because it is suitable for everything and on everything.
- It is multi-purpose and the only one that solves any installation problem no matter how difficult the substrate.
- It maintains its volume and is easy and safe to work with.
- H 40 GEL is thixotropic in all thicknesses, soft and light. Even on the walls you work effortlessly and without the tile slipping.
- It guarantees maximum bonding strength through complete wetting of the tile in all conditions.
- It structurally bonds the tile to the substrate thanks to Geolegante (Geobonding Material) and thus guarantees a bond resistant to time.
Waterproofing and oil-repellent liquid, siloxane-based, with high penetrating capacity (microtechnology). Its protective action creates an invisible surface film, which does not peel or slip. Prevents staining from oil, wine, soda, ink, rust, pet dirt, air pollutants, etc.
Waterproofing anti-crack membrane with high adhesion for balconies, terraces and horizontal surfaces, before the installation of ceramic tiles, natural stones and parquet. Seals even in overlapping installation, on substrates with cracks, not fully matured or with possible vapor pressures from their residual moisture.
Repair cement mortar of high mechanical strength, for thin coatings, from 2-20mm/layer.
Porcelain grout and adhesive material, certified, with high fluidity and ease of cleaning, bacteriostatic and fungistatic, waterproof and stain resistant, for joints from 0 to 10 mm of high chemical-mechanical resistance, guarantees the continuity of surfaces made of ceramic materials, ideal for the GreenBuilding.
Special alkali-resistant glass reinforcement mesh, specific for reinforcing the Nanoflex No Limits gel waterproofing membrane in the Laminato 2 No Limits system.
Natural sanding material certified, environmentally friendly, with pure hydraulic lime NHL 3.5 according to EN 459‑1 standard, for the smooth finish of highly breathable plasters, ideal for GreenBuilding and Historic Restoration.
- High resistance and waterproof plasters
- Floor screeds with resistance to friction, hydrostatic pressure and chemical effects
- Adhesion strengthening mortars (ariani) as a bonding layer between old and new concrete or mortar
- Mortars of small thickness for finishing, finishes
- Repair mortars in concrete elements
- Improvement of water-soluble paints so that they do not rub off and withstand the effects of weather
- Improvement of adhesion and tightness of cementitious spreadable sealants
- Primer in colors
- Primer for roof screeds
- Asphalt emulsion booster
Elastomeric roof sealant
Acrylic, of high adhesion and elasticity, with resistance to temperature changes and rainfall.
Its whiteness significantly reduces heat absorption from the roof.